Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Go to https://ws.nrao.edu/workspaces/active-requests (do NOT log in, this is not required and will break your session) and enter the EB to be processed in the "SDM ID" box at the top, hit the "Calibrate" button. Make sure Auto-calibration button at the top right is set to run (this has nothing yet to do with the automatic start of jobs, which is controlled by the CAPO profile*).
  2. The job should appear in the job list with a status of "executing". Select the job by clicking the request on the left-hand column, this should open a request page, with the option to submit the job at the lower right. Go ahead and submit the job.
  3. The job should appear in the job list with a status of "executing".
  4. You should be able to see the working directory in lustre for the request in the Version Parameters section of the request page. You can click on the text to copy it.Note the details in the pilot google spreadsheet https://docs.google.com/spreadsheets/d/10Jn6TyEsthP0KQgbuhpIPn4fqWlLvhEO7tAkFMPny0o/edit?usp=sharing
  5. At any point prior to QA you should set the SRDP status to T/F with the checkbox and assign a DA (yourself) and an AOD to the job. 
  6. When complete, the status will change to "Awaiting QA". Click the link to the request page in the "Request" column, or the link the email to Workapsaces-Analysts, which will take you to the request page.
  7. Follow the link to the weblog and perform QA (if you need to you can go to the working directory on spool using the directory name from step 4). The QA Notes can be viewed and edited by clicking the Edit QA Notes button on the request page. You will need them for the email to the user later
  8. On the bottom right is a button to edit the DA notes, these notes persist between versions and are not seen by the user.
  9. If you need to add flags, click "Create new version" on the bottom right of the page, and upload a flagtemplate.txt file. You can either submit one with the commands in, or submit a blank file (touch <FSID>.flagtemplate.txt) and edit in the editor.
  10. If you need to edit the PPR, this is also accessible to edit at this stage.
  11. Select the latest version on the drop-down menu under "Versions", then click "Submit new version". The old version remains and you can toggle between them using the dropdown menu. Note that once uploaded, the flag file (or any other uploaded file) cannot be overwritten in subsequent versions, to add flags to later versions you will need to go to the relevant directory on spool soon after the job is started and copy or edit the flagtemplate file directly. 
  12. When you are satisfied, edit the QA notes and inform the AOD (always Mark Lacy for the pilot) that e.g. via mattermost  that a job is ready for QA. The AOD will double- 
  13. AOD role: check the calibration and click "QAPass", or send it back to the DA for a rerun, the QA notes and that the SRDP status is set correctly. If satisfied, hit QAPass. QAPass will pass the current selected version and fail all the others. If not, you can return to the DA after adding comments in the DA notes. The execution state should change to "Ingesting", then "Complete".
  14. AOD role: if the data are SRDP wait for the calibration ingest to complete, then hit the , at which point you should get an email saying the request was ingested.  A "Create Image request" button appear at the bottom right of the request page. Create the image request, this will create the request and (should) take you to a new image request page (note that with some browsers/brower settings you might need to go . Go back to the active-requests page, select tstdstd_cms_imaging from the top-left menu and click on the request to get to the request page).. Set the DA and AOD to the same people as the calibration request, and status to SRDP.
  15. AOD role: Submit the image request  (bottom right button on the image request page).
  16. Once the imaging is complete, the state will change to "Awaiting QA". The DA should watch the image queue for their datasets to check for new job completions.
  17. Weblog review can be carried out in the same way as for callibration, once the state has changed to "Waiting for QA".You can upload a new PPR for imaging, but currently no flagging can be applied at the imaging stage, if you need more flagging you will have to go back to step 1 and recalibratecalibration. Note the "Launch CARTA session" capability that can be used to inspect the image data.
  18. Once satisfied, Let edit the QA notes and let the AOD (Mark Lacy) know that the image is ready for review via Mattermost; @mlacy).
  19. AOD role:  If satisfied, check the QA notes and The AOD will click "QA Pass" and an email will be sent to Workspaces-Analysts to say that the data were ingested.The archive takes a while (~24hr?) to reindex and have the data appear, so wait one day, then send an email to the PI and co-Is with text as in the bottom info box below:
Info

*need to set edu.nrao.workspaces.StandardCalibrationSettings.runState = PAUSE, not STOP in /home/casa/capo/dsoc-prod.properties))


...